The Fisher F2 features a large control panel with seven big push buttons and an equally big display. The control panel is very simple to operate, making this an excellent detector for beginners.
On the control housing you will see both a two (2) digit display and a target category readout on the top showing items from iron/foil to nickels, to dimes, quarters, etc. An arrow will illuminate under the target category and a two digit number will show specific target value that helps you identify your target. Anyone can pick up the Fisher F2 and start detecting right away.
The F2 features “Notch Discrimination” which allows you to pinpoint an item and prevent the detector from detecting it again (great for those pesky pull tabs!). It has an “All Metals” mode which is great for scanning parks, beaches and old home sites for coins and jewelry while still ignoring old scrap iron. Meanwhile the depth readout will tell you exactly how deep to dig for your target.
The sensitivity of this machine has earned rave reviews from both first time users and experienced detectorists. It has found items as deep as 10” in various soil types with medium sensitivity. Meanwhile the Pinpointing feature allows you to hone in on specific items. The 4” coil makes hunting in trash areas a breeze, and tested hot on 3 grain gold nuggets – meaning this machine is good for prospecting as well!
The light weight of the Fisher F2 combined with the adjustable arm cuff will keep you hunting for hours! Headphone jack is conveniently located on the bottom of the unit and is weather protected to stay safe in various hunting conditions.
This rugged, easy-to-use metal detector will help you find treasures in almost any ground conditions. The ACE 150 is very affordable and comes with a Garrett PROformance 6.5 x 9” coil.
The ACE 150 features the Three-Tone Audio Discrimination, which will alert you to different treasures with different tones. Because it has a ¼” headphone jack on the control panel, almost any stereo-type headphone-set can be used with the ACE 150. But this is only where the features begin!
This detector is easy-to-use but still provides you with the high performance handling you should expect from Garrett products. Thankfully there are no complex settings or adjustments to make, and you should find the 3 pre-programmed notched search modes intuitive. With its spot-on graphic target ID, impressive discrimination mode with four sensitivity settings, and three depth levels, the ACE 150 is a purchase you won’t regret making.
The Titan 3000 offers the most advanced level of hunting from the Titan series of metal detectors. Like others in the Titan series, the large LCD screen will display a target identification and visual depth readout – but with more detail than most other detectors that cost much more!
Identify iron, nickels, gold rings, wheat cents, quarters and more with the 0 – 199 three digit target indication. Or use discrimination mode with depth reading, pinpointing, ITD mode and Notch discrimination to ensure optimum operation in all types of soil and give you outstanding results in each!
This detector is as simple as “A – B – C” to use! Scan the ground with your searchcoil, when the coil goes over a target the detector will give you: A. an Audio Target Identification sound. B. Arrows on the right side of the meter to indicate the probable target zone. And C. an estimated “Depth Scale” on the left side of the meter to tell you how far down to dig! Dig your target and continue to scan.
Garrett doesn’t crown this detector the “King of Treasure Hunting” for nothing! This Graphic Target Imaging detector is the top of the line in the Garrett series with a significant amount of easy-to-use features that make it a well-rounded, multi-purpose metal detector. But what exactly is this imaging Garrett boasts of? It’s the technology that lets your detector measure the size of the treasure you’ve swept it across and report that information to you. It also tells you the depth of the target and what it probably is! This allows you to dig up only what you know is worth working for!
Garrett GTI 2500 Pro package includes free from the factory:
1.) 12.5” Searchcoil
2.) Garrett Supreme Carrying Case
3.) Garrett Master Sound Headphones
4.) How to Find Lost Treasure - Book
Called a "coin magnet" by almost all who use it, this easy-to-use metal detector features an LCD screen, exceptional discrimination and an accurate target identification. The ACE 250 is very affordable and comes with a Garrett PROformance 6.5 x 9” coil that is completely interchangeable with smaller, sniper coils.
The ACE 250 features the Three-Tone Audio Discrimination, which will alert you to different treasures with different tones. Because it has a ¼” headphone jack on the control panel, almost any stereo-type headphone-set can be used with the ACE 250. But this is only where the features begin!
Having recently been updated, this machine was made to work with the 21st century treasure hunter – you! The rugged design is a perfect compliment to the multitude of intuitive features and the affordable price tag. The ACE 250 features a graphic target ID cursor with 12 segments, an “Accept” or “Reject” discrimination notice for greater accuracy, “Coin Depth” mode to indicate how far down you’ll need to dig, and an eight setting “Sensitivity/Depth” Adjustment.
This powerful, intelligent metal detector will help you find treasures that have been both lost and missed by the generations before you either on land or 200ft. under the sea! The Excalibur II we're featuring comes with a powerful 10" searchcoil and state of the art submersible headphones.
This Minelab Excalibur II comes with a 10" Double 'D' coil that contains two 'D' shaped windings and is perfect for locating deep targets. The Double 'D' coil provides you with a detection pattern as you search that is "blade like" and is sensitive from tip to heel. This searchcoil is versatile and deep-seeking, making it effective for any type of detecting.
Because the Excalibur II was meant to be submersible, you can take this coil and the entire detector into 200 feet of water without any adverse affects - this means the possibilities of finding treasure are almost limitless!
Possibly the most impressive aspect of the Excalibur II may not be its capacity to go 200ft. under water, but its 17 frequencies. This is possible thanks to the BBS (Broad Band Spectrum) technology. Find thin gold nuggets and delicate jewelry other detectors miss, while ignoring hot rocks, salt, terra cotta and overall changing ground conditions.
The Excalibur's 17 frequencies literally provide an "Iron Mask" feature that allows you to reject iron, yet still detect good, valuable treasure scattered among it. The range of the Excalibur's transmission is from 1.5 kHz to 25.5 kHz (done in 1.5 kHz increments). All 17 frequencies are transmitted together at one time, operating simultaneously with multiple tone responses.
Thankfully these multiple, simultaneous frequencies are easy-to-use and understand. Just like a single frequency detector, you turn on the Excalibur II, set the controls between operating modes, and start your treasure hunt. The Excalibur II will do the majority of the work by interpreting target signals, removing ground mineralization interference and analyzing the remaining signal. The only sound you'll hear is the one indicating you've found treasure!
There are two operating modes on the Excalibur II - "Discriminate" mode and "Pinpoint" mode. While these modes seem simple in theory, we're sure you'll find them both to be quite powerful. Simply set the controls to your desired position depending on your location and what your desired treasure is and go! For each type of treasure you find a different tone will signal. After a little bit of practice we're confident you'll know exactly what you've found before you dig for it.
What makes the X-Terra 70 the “flagship” of the X-Terra series? It’s loaded with features, starting with two detection modes; “coin” or “relic.” It also provides you with two ground balancing modes “normal,” and “salt water beach.” The X-Terra 70 has “Adjustable Ground Balance” as well as “Noise Cancellation” and even more importantly – it accepts coils at three different frequencies! And that's just the tip of the iceberg!
The Minelab X-Terra 70 comes with a 9” “Slimline” searchcoil that is perfect for locating deep targets. This coil is made from a lightweight material that keeps you from becoming fatigued as you sweep the coil in search of treasure, and it is completely interchangeable with many other Minelab searchcoils.
All detectors from the X-Terra series feature an easy-to-read and intuitive LCD screen with quick access to key functions. The X-Terra 70 allows you to save your settings, and also displays a “Target Depth Indicator.” You can adjust settings such as “Tone ID,” “Graphic Pinpoint Function,” “All Metal Program,” and “Multi-Notch Accept/Reject.”
Minelab’s pinpointing couldn’t get any easier or any better. By enabling the pinpoint mode on your detector, you have told it to become a non-motion detector; temporarily disengaging discrimination patterns and emitting a signal for many more metals.
But where this series really shines is the new “VFLEX” technology. The X-Terra 70’s “VFLEX” technology uses state of the art digital and mixed-signal components to enhance standard, single frequency technology. This replaces most of the analogue circuitry with digital signal processing, and gives you dependable performance and improved immunity to environmental conditions such as ground mineralization, electromagnetic interference and temperature variations. This technology is updated every time you turn your detector on – the micro-controllers in the control box establish communication through a digital data link with the “Slimline” searchcoil to accurately calibrate your detector!
