The Full Band Spectrum (FBS) circuit automatically transmits multiple frequencies simultaneously. The increased frequency range means that the signal received from the detector coil is analyzed from a wide range of responses. This allows the Explorer SE to analyze more target information so that the Target Identification (ID) is more accurate.
Ground balancing is automatic with Minelab\\\'s advanced digital filtering. Whatever field conditions you encounter, from dry clay to wet black sand or rich loam, Minelab will find what you\\\'re looking for.
Minelab\\\'s unique FBS technology means deep, sensitive, accurate detecting.
Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)
The Nautilus VLF DMC II is very affordable and features two simple operating modes and an optimized searchcoil.
The model we’re featuring comes standard with a state of the art searchcoil made from light-weight material. The VLF DMC II comes standard with a 10” coil, but 6”, 8”, and 15” searchcoils are also available. These searchcoil are versatile and deep-seeking, making them effective for any type of detecting. Of course Nautilus optimizes each detector to the specific coil you purchase it with, insuring optimal performance right out of the box!
The specifications on this detector are dense but plentiful. The audio discrimination is 950 hz while the operating frequency is 14kHz. You can physically configure the handle in “S” or “U” choice, with the standard grey enclosure and accompanying padded headphones. Switches included on the VLF DMC are “on/off,” “Dual/Single Tone,” and adjustable “Threshold.”
The DMC II is designed to be a dual mode detector for use in highly mineralized soil. This is where you need maximum performance from your detector in the “all-metal” and “discrimination” modes. The two modes on the DMC II are “Ground Reject Discrimination” mode and “VLF Ground Balance” mode. What makes the DMC II different from any other detector is that you can monitor both of these modes at the same time! This allows you to adjust the “VLF Ground Balance” for the terrain you’re hunting and get a weaker signal for the more conductive target. For example, an aluminum pull-tab can be detected deeper than a quarter approximately the same size.
The construction of the Nautilus VLF DMC Metal Detectors is solid and sturdy. While they tend to weigh more than many other detectors, they are also significantly better built and more reliable. All connectors are strictly heavy-duty, nickel-plated, with a threaded clamp ring. The coils are all mounted with thick lugs and a heavy duty cable strain relief. Stainless steel hardware is used throughout the DMC II construction, and its total weight is 4.3 to 4.5lbs.
The Nautilus VLF DMC II is very affordable and features two simple operating modes and an optimized searchcoil.
The model we’re featuring comes standard with a state of the art searchcoil made from light-weight material. The VLF DMC II comes standard with a 10” coil, but 6”, 8”, and 15” searchcoils are also available. These searchcoil are versatile and deep-seeking, making them effective for any type of detecting. Of course Nautilus optimizes each detector to the specific coil you purchase it with, insuring optimal performance right out of the box!
The specifications on this detector are dense but plentiful. The audio discrimination is 950 hz while the operating frequency is 14kHz. You can physically configure the handle in “S” or “U” choice, with the standard grey enclosure and accompanying padded headphones. Switches included on the VLF DMC are “on/off,” “Dual/Single Tone,” and adjustable “Threshold.”
The DMC II is designed to be a dual mode detector for use in highly mineralized soil. This is where you need maximum performance from your detector in the “all-metal” and “discrimination” modes. The two modes on the DMC II are “Ground Reject Discrimination” mode and “VLF Ground Balance” mode. What makes the DMC II different from any other detector is that you can monitor both of these modes at the same time! This allows you to adjust the “VLF Ground Balance” for the terrain you’re hunting and get a weaker signal for the more conductive target. For example, an aluminum pull-tab can be detected deeper than a quarter approximately the same size.
The construction of the Nautilus VLF DMC Metal Detectors is solid and sturdy. While they tend to weigh more than many other detectors, they are also significantly better built and more reliable. All connectors are strictly heavy-duty, nickel-plated, with a threaded clamp ring. The coils are all mounted with thick lugs and a heavy duty cable strain relief. Stainless steel hardware is used throughout the DMC II construction, and its total weight is 4.3 to 4.5lbs.
The Nautilus VLF DMC II is very affordable and features two simple operating modes and an optimized searchcoil.
The model we’re featuring comes standard with a state of the art searchcoil made from light-weight material. The VLF DMC II comes standard with a 10” coil, but 6”, 8”, and 15” searchcoils are also available. These searchcoil are versatile and deep-seeking, making them effective for any type of detecting. Of course Nautilus optimizes each detector to the specific coil you purchase it with, insuring optimal performance right out of the box!
The specifications on this detector are dense but plentiful. The audio discrimination is 950 hz while the operating frequency is 14kHz. You can physically configure the handle in “S” or “U” choice, with the standard grey enclosure and accompanying padded headphones. Switches included on the VLF DMC are “on/off,” “Dual/Single Tone,” and adjustable “Threshold.”
The DMC II is designed to be a dual mode detector for use in highly mineralized soil. This is where you need maximum performance from your detector in the “all-metal” and “discrimination” modes. The two modes on the DMC II are “Ground Reject Discrimination” mode and “VLF Ground Balance” mode. What makes the DMC II different from any other detector is that you can monitor both of these modes at the same time! This allows you to adjust the “VLF Ground Balance” for the terrain you’re hunting and get a weaker signal for the more conductive target. For example, an aluminum pull-tab can be detected deeper than a quarter approximately the same size.
The construction of the Nautilus VLF DMC Metal Detectors is solid and sturdy. While they tend to weigh more than many other detectors, they are also significantly better built and more reliable. All connectors are strictly heavy-duty, nickel-plated, with a threaded clamp ring. The coils are all mounted with thick lugs and a heavy duty cable strain relief. Stainless steel hardware is used throughout the DMC II construction, and its total weight is 4.3 to 4.5lbs.
The Nautilus VLF DMC II is very affordable and features two simple operating modes and an optimized searchcoil.
The model we’re featuring comes standard with a state of the art searchcoil made from light-weight material. The VLF DMC II comes standard with a 10” coil, but 6”, 8”, and 15” searchcoils are also available. These searchcoil are versatile and deep-seeking, making them effective for any type of detecting. Of course Nautilus optimizes each detector to the specific coil you purchase it with, insuring optimal performance right out of the box!
The specifications on this detector are dense but plentiful. The audio discrimination is 950 hz while the operating frequency is 14kHz. You can physically configure the handle in “S” or “U” choice, with the standard grey enclosure and accompanying padded headphones. Switches included on the VLF DMC are “on/off,” “Dual/Single Tone,” and adjustable “Threshold.”
The DMC II is designed to be a dual mode detector for use in highly mineralized soil. This is where you need maximum performance from your detector in the “all-metal” and “discrimination” modes. The two modes on the DMC II are “Ground Reject Discrimination” mode and “VLF Ground Balance” mode. What makes the DMC II different from any other detector is that you can monitor both of these modes at the same time! This allows you to adjust the “VLF Ground Balance” for the terrain you’re hunting and get a weaker signal for the more conductive target. For example, an aluminum pull-tab can be detected deeper than a quarter approximately the same size.
The construction of the Nautilus VLF DMC Metal Detectors is solid and sturdy. While they tend to weigh more than many other detectors, they are also significantly better built and more reliable. All connectors are strictly heavy-duty, nickel-plated, with a threaded clamp ring. The coils are all mounted with thick lugs and a heavy duty cable strain relief. Stainless steel hardware is used throughout the DMC II construction, and its total weight is 4.3 to 4.5lbs.
The Nautilus VLF DMC II is very affordable and features two simple operating modes and an optimized searchcoil.
The model we’re featuring comes standard with a state of the art searchcoil made from light-weight material. These searchcoils are versatile and deep-seeking, making them effective for any type of detecting. Of course Nautilus optimizes each detector to the specific coil you purchase it with, insuring optimal performance right out of the box!
The specifications on this detector are dense but plentiful. The audio discrimination is 950 hz while the operating frequency is 14kHz. You can physically configure the handle in “S” or “U” choice, with the standard grey enclosure and accompanying padded headphones. Switches included on the VLF DMC are “on/off,” “Dual/Single Tone,” and adjustable “Threshold.”
The DMC II is designed to be a dual mode detector for use in highly mineralized soil. This is where you need maximum performance from your detector in the “all-metal” and “discrimination” modes. The two modes on the DMC II are “Ground Reject Discrimination” mode and “VLF Ground Balance” mode. What makes the DMC II different from any other detector is that you can monitor both of these modes at the same time! This allows you to adjust the “VLF Ground Balance” for the terrain you’re hunting and get a weaker signal for the more conductive target. For example, an aluminum pull-tab can be detected deeper than a quarter approximately the same size.
The construction of the Nautilus VLF DMC Metal Detectors is solid and sturdy. While they tend to weigh more than many other detectors, they are also significantly better built and more reliable. All connectors are strictly heavy-duty, nickel-plated, with a threaded clamp ring. The coils are all mounted with thick lugs and a heavy duty cable strain relief. Stainless steel hardware is used throughout the DMC II construction, and its total weight is 4.3 to 4.5lbs.
The Nautilus VLF DMC II is very affordable and features two simple operating modes and an optimized searchcoil.
The model we’re featuring comes standard with a state of the art searchcoil made from light-weight material. The VLF DMC II comes standard with a 10” coil, but 6”, 8”, and 15” searchcoils are also available. These searchcoil are versatile and deep-seeking, making them effective for any type of detecting. Of course Nautilus optimizes each detector to the specific coil you purchase it with, insuring optimal performance right out of the box!
The specifications on this detector are dense but plentiful. The audio discrimination is 950 hz while the operating frequency is 14kHz. You can physically configure the handle in “S” or “U” choice, with the standard grey enclosure and accompanying padded headphones. Switches included on the VLF DMC are “on/off,” “Dual/Single Tone,” and adjustable “Threshold.”
The DMC II is designed to be a dual mode detector for use in highly mineralized soil. This is where you need maximum performance from your detector in the “all-metal” and “discrimination” modes. The two modes on the DMC II are “Ground Reject Discrimination” mode and “VLF Ground Balance” mode. What makes the DMC II different from any other detector is that you can monitor both of these modes at the same time! This allows you to adjust the “VLF Ground Balance” for the terrain you’re hunting and get a weaker signal for the more conductive target. For example, an aluminum pull-tab can be detected deeper than a quarter approximately the same size.
The construction of the Nautilus VLF DMC Metal Detectors is solid and sturdy. While they tend to weigh more than many other detectors, they are also significantly better built and more reliable. All connectors are strictly heavy-duty, nickel-plated, with a threaded clamp ring. The coils are all mounted with thick lugs and a heavy duty cable strain relief. Stainless steel hardware is used throughout the DMC II construction, and its total weight is 4.3 to 4.5lbs.
The Nautilus VLF DMC II is very affordable and features two simple operating modes and an optimized searchcoil.
The model we’re featuring comes standard with a state of the art searchcoil made from light-weight material. The VLF DMC II comes standard with a 10” coil, but 6”, 8”, and 15” searchcoils are also available. These searchcoil are versatile and deep-seeking, making them effective for any type of detecting. Of course Nautilus optimizes each detector to the specific coil you purchase it with, insuring optimal performance right out of the box!
The specifications on this detector are dense but plentiful. The audio discrimination is 950 hz while the operating frequency is 14kHz. You can physically configure the handle in “S” or “U” choice, with the standard grey enclosure and accompanying padded headphones. Switches included on the VLF DMC are “on/off,” “Dual/Single Tone,” and adjustable “Threshold.”
The DMC II is designed to be a dual mode detector for use in highly mineralized soil. This is where you need maximum performance from your detector in the “all-metal” and “discrimination” modes. The two modes on the DMC II are “Ground Reject Discrimination” mode and “VLF Ground Balance” mode. What makes the DMC II different from any other detector is that you can monitor both of these modes at the same time! This allows you to adjust the “VLF Ground Balance” for the terrain you’re hunting and get a weaker signal for the more conductive target. For example, an aluminum pull-tab can be detected deeper than a quarter approximately the same size.
The construction of the Nautilus VLF DMC Metal Detectors is solid and sturdy. While they tend to weigh more than many other detectors, they are also significantly better built and more reliable. All connectors are strictly heavy-duty, nickel-plated, with a threaded clamp ring. The coils are all mounted with thick lugs and a heavy duty cable strain relief. Stainless steel hardware is used throughout the DMC II construction, and its total weight is 4.3 to 4.5lbs.
The Nautilus VLF DMC II is very affordable and features two simple operating modes and an optimized searchcoil.
The model we’re featuring comes standard with a state of the art searchcoil made from light-weight material. The VLF DMC II comes standard with a 10” coil, but 6”, 8”, and 15” searchcoils are also available. These searchcoil are versatile and deep-seeking, making them effective for any type of detecting. Of course Nautilus optimizes each detector to the specific coil you purchase it with, insuring optimal performance right out of the box!
The specifications on this detector are dense but plentiful. The audio discrimination is 950 hz while the operating frequency is 14kHz. You can physically configure the handle in “S” or “U” choice, with the standard grey enclosure and accompanying padded headphones. Switches included on the VLF DMC are “on/off,” “Dual/Single Tone,” and adjustable “Threshold.”
The DMC II is designed to be a dual mode detector for use in highly mineralized soil. This is where you need maximum performance from your detector in the “all-metal” and “discrimination” modes. The two modes on the DMC II are “Ground Reject Discrimination” mode and “VLF Ground Balance” mode. What makes the DMC II different from any other detector is that you can monitor both of these modes at the same time! This allows you to adjust the “VLF Ground Balance” for the terrain you’re hunting and get a weaker signal for the more conductive target. For example, an aluminum pull-tab can be detected deeper than a quarter approximately the same size.
The construction of the Nautilus VLF DMC Metal Detectors is solid and sturdy. While they tend to weigh more than many other detectors, they are also significantly better built and more reliable. All connectors are strictly heavy-duty, nickel-plated, with a threaded clamp ring. The coils are all mounted with thick lugs and a heavy duty cable strain relief. Stainless steel hardware is used throughout the DMC II construction, and its total weight is 4.3 to 4.5lbs.
The Nautilus VLF DMC II is very affordable and features two simple operating modes and an optimized searchcoil.
The model we’re featuring comes standard with a state of the art searchcoil made from light-weight material. The VLF DMC II comes standard with a 10” coil, but 6”, 8”, and 15” searchcoils are also available. These searchcoil are versatile and deep-seeking, making them effective for any type of detecting. Of course Nautilus optimizes each detector to the specific coil you purchase it with, insuring optimal performance right out of the box!
The specifications on this detector are dense but plentiful. The audio discrimination is 950 hz while the operating frequency is 14kHz. You can physically configure the handle in “S” or “U” choice, with the standard grey enclosure and accompanying padded headphones. Switches included on the VLF DMC are “on/off,” “Dual/Single Tone,” and adjustable “Threshold.”
The DMC II is designed to be a dual mode detector for use in highly mineralized soil. This is where you need maximum performance from your detector in the “all-metal” and “discrimination” modes. The two modes on the DMC II are “Ground Reject Discrimination” mode and “VLF Ground Balance” mode. What makes the DMC II different from any other detector is that you can monitor both of these modes at the same time! This allows you to adjust the “VLF Ground Balance” for the terrain you’re hunting and get a weaker signal for the more conductive target. For example, an aluminum pull-tab can be detected deeper than a quarter approximately the same size.
The construction of the Nautilus VLF DMC Metal Detectors is solid and sturdy. While they tend to weigh more than many other detectors, they are also significantly better built and more reliable. All connectors are strictly heavy-duty, nickel-plated, with a threaded clamp ring. The coils are all mounted with thick lugs and a heavy duty cable strain relief. Stainless steel hardware is used throughout the DMC II construction, and its total weight is 4.3 to 4.5lbs.
The Nautilus VLF DMC II is very affordable and features two simple operating modes and an optimized searchcoil.
The model we’re featuring comes standard with a state of the art searchcoil made from light-weight material. The VLF DMC II comes standard with a 10” coil, but 6”, 8”, and 15” searchcoils are also available. These searchcoil are versatile and deep-seeking, making them effective for any type of detecting. Of course Nautilus optimizes each detector to the specific coil you purchase it with, insuring optimal performance right out of the box!
The specifications on this detector are dense but plentiful. The audio discrimination is 950 hz while the operating frequency is 14kHz. You can physically configure the handle in “S” or “U” choice, with the standard grey enclosure and accompanying padded headphones. Switches included on the VLF DMC are “on/off,” “Dual/Single Tone,” and adjustable “Threshold.”
The DMC II is designed to be a dual mode detector for use in highly mineralized soil. This is where you need maximum performance from your detector in the “all-metal” and “discrimination” modes. The two modes on the DMC II are “Ground Reject Discrimination” mode and “VLF Ground Balance” mode. What makes the DMC II different from any other detector is that you can monitor both of these modes at the same time! This allows you to adjust the “VLF Ground Balance” for the terrain you’re hunting and get a weaker signal for the more conductive target. For example, an aluminum pull-tab can be detected deeper than a quarter approximately the same size.
The construction of the Nautilus VLF DMC Metal Detectors is solid and sturdy. While they tend to weigh more than many other detectors, they are also significantly better built and more reliable. All connectors are strictly heavy-duty, nickel-plated, with a threaded clamp ring. The coils are all mounted with thick lugs and a heavy duty cable strain relief. Stainless steel hardware is used throughout the DMC II construction, and its total weight is 4.3 to 4.5lbs.
The Nautilus VLF DMC II is very affordable and features two simple operating modes and an optimized searchcoil.
The model we’re featuring comes standard with a state of the art searchcoil made from light-weight material. The VLF DMC II comes standard with a 10” coil, but 6”, 8”, and 15” searchcoils are also available. These searchcoil are versatile and deep-seeking, making them effective for any type of detecting. Of course Nautilus optimizes each detector to the specific coil you purchase it with, insuring optimal performance right out of the box!
The specifications on this detector are dense but plentiful. The audio discrimination is 950 hz while the operating frequency is 14kHz. You can physically configure the handle in “S” or “U” choice, with the standard grey enclosure and accompanying padded headphones. Switches included on the VLF DMC are “on/off,” “Dual/Single Tone,” and adjustable “Threshold.”
The DMC II is designed to be a dual mode detector for use in highly mineralized soil. This is where you need maximum performance from your detector in the “all-metal” and “discrimination” modes. The two modes on the DMC II are “Ground Reject Discrimination” mode and “VLF Ground Balance” mode. What makes the DMC II different from any other detector is that you can monitor both of these modes at the same time! This allows you to adjust the “VLF Ground Balance” for the terrain you’re hunting and get a weaker signal for the more conductive target. For example, an aluminum pull-tab can be detected deeper than a quarter approximately the same size.
The construction of the Nautilus VLF DMC Metal Detectors is solid and sturdy. While they tend to weigh more than many other detectors, they are also significantly better built and more reliable. All connectors are strictly heavy-duty, nickel-plated, with a threaded clamp ring. The coils are all mounted with thick lugs and a heavy duty cable strain relief. Stainless steel hardware is used throughout the DMC II construction, and its total weight is 4.3 to 4.5lbs.
The Nautilus VLF DMC II is very affordable and features two simple operating modes and an optimized searchcoil.
The model we’re featuring comes standard with a state of the art searchcoil made from light-weight material. The VLF DMC II comes standard with a 10” coil, but 6”, 8”, and 15” searchcoils are also available. These searchcoil are versatile and deep-seeking, making them effective for any type of detecting. Of course Nautilus optimizes each detector to the specific coil you purchase it with, insuring optimal performance right out of the box!
The specifications on this detector are dense but plentiful. The audio discrimination is 950 hz while the operating frequency is 14kHz. You can physically configure the handle in “S” or “U” choice, with the standard grey enclosure and accompanying padded headphones. Switches included on the VLF DMC are “on/off,” “Dual/Single Tone,” and adjustable “Threshold.”
The DMC II is designed to be a dual mode detector for use in highly mineralized soil. This is where you need maximum performance from your detector in the “all-metal” and “discrimination” modes. The two modes on the DMC II are “Ground Reject Discrimination” mode and “VLF Ground Balance” mode. What makes the DMC II different from any other detector is that you can monitor both of these modes at the same time! This allows you to adjust the “VLF Ground Balance” for the terrain you’re hunting and get a weaker signal for the more conductive target. For example, an aluminum pull-tab can be detected deeper than a quarter approximately the same size.
The construction of the Nautilus VLF DMC Metal Detectors is solid and sturdy. While they tend to weigh more than many other detectors, they are also significantly better built and more reliable. All connectors are strictly heavy-duty, nickel-plated, with a threaded clamp ring. The coils are all mounted with thick lugs and a heavy duty cable strain relief. Stainless steel hardware is used throughout the DMC II construction, and its total weight is 4.3 to 4.5lbs.
You can go anywhere with the CZ-21, even 250 feet underwater.
The CZ-21 is a go-anywhere, do anything, all-weather, target-ID machine that is leak proof to 250 feet. And its patented electronics make it deep-seeking while it ignores the destabilizing effects of salt water. It is the perfect target ID machine for the versatile treasure hunter who wants to hunt anywhere-underwater, on the beach, in the surf, on dry land and in all kinds of weather.
Target I.D: put on the headphones, swing the search coil, and listen to the 3-tone target I.D. A low tone means you are over iron, amid tone means pull tab of
gold ring and a high tone means a coin. And a distinctive bell tone lets you know when you are over big , shallow targets, no more digging beer cans! Twin LED's: Two bright red, light-emitting diodes flash when you pass over a target and dim as you move away. For precise pinpointing, use the Pinpoint button, which puts the detector in a no-motion-required , all metal mode. See for yourself: If you are an all-around treasure hunter
who will not settle for second best, the CZ-21 is the detector for you.
Feature: Submersible to 250 feet, three-tone audio target ID, visual target response and signal strength indicated by two bright-red LEDs, patented Dual-Frequency Fourier Domain Signal analysis, silent-search, VLF, slow motion discrimination, super-hot wide-scan all metal auto tune mode, push-button VCO no-motion pinpointing, big-target alert, increased depth in mineralized soil, wet-sand operation, faint target audio boost, push-button ground balance, separately sealed battery compartment with four 9v batteries (gives a solid 45 hour use), your choice of and 8" or 10" spider open-center coil, removable control housing mounts on your belt with belt clip (included), easy to use: turn-on-and-go, pre-set control.
Summary of Field Test (Reprinted from Lost Treasure Magazine)
Incorporating all of the features of the field-proven CZ-5 and CZ-6 with the exception of the meter, the CZ-21 should prove to be an extremely popular detector with not only water and beach hunters, but coin and relic
hunters who want a top-notch detector that is totally impervious to the elements. This is truly a detector that will perform equally as well in salt-water surf as it will in a fresh water lake, a school yard,
or mineralized battlefield or campsite.
The CZ-21 comes with Fisher's two year warranty, which considering it's an underwater detector, shows how confident the factory is that it will hold up under virtually any condition one might use it in.
You can go anywhere with the CZ-21, even 250 feet underwater.
The CZ-21 is a go-anywhere, do anything, all-weather, target-ID machine that is leak proof to 250 feet. And its patented electronics make it deep-seeking while it ignores the destabilizing effects of salt water. It is the perfect target ID machine for the versatile treasure hunter who wants to hunt anywhere-underwater, on the beach, in the surf, on dry land and in all kinds of weather.
Target I.D: put on the headphones, swing the search coil, and listen to the 3-tone target I.D. A low tone means you are over iron, amid tone means pull tab of
gold ring and a high tone means a coin. And a distinctive bell tone lets you know when you are over big , shallow targets, no more digging beer cans! Twin LED's: Two bright red, light-emitting diodes flash when you pass over a target and dim as you move away. For precise pinpointing, use the Pinpoint button, which puts the detector in a no-motion-required , all metal mode. See for yourself: If you are an all-around treasure hunter
who will not settle for second best, the CZ-21 is the detector for you.
Feature: Submersible to 250 feet, three-tone audio target ID, visual target response and signal strength indicated by two bright-red LEDs, patented Dual-Frequency Fourier Domain Signal analysis, silent-search, VLF, slow motion discrimination, super-hot wide-scan all metal auto tune mode, push-button VCO no-motion pinpointing, big-target alert, increased depth in mineralized soil, wet-sand operation, faint target audio boost, push-button ground balance, separately sealed battery compartment with four 9v batteries (gives a solid 45 hour use), your choice of and 8" or 10" spider open-center coil, removable control housing mounts on your belt with belt clip (included), easy to use: turn-on-and-go, pre-set control.
Summary of Field Test (Reprinted from Lost Treasure Magazine)
Incorporating all of the features of the field-proven CZ-5 and CZ-6 with the exception of the meter, the CZ-21 should prove to be an extremely popular detector with not only water and beach hunters, but coin and relic
hunters who want a top-notch detector that is totally impervious to the elements. This is truly a detector that will perform equally as well in salt-water surf as it will in a fresh water lake, a school yard,
or mineralized battlefield or campsite.
The CZ-21 comes with Fisher's two year warranty, which considering it's an underwater detector, shows how confident the factory is that it will hold up under virtually any condition one might use it in.
This new 1st Texas metal detector is a perfect mid-level detector with features of metal detectors costing hundreds of dollars more – It\\\\\\\\\\\\\\\'s easy-to-tune, easy-to-use, and made to lead you straight to treasures!
Very few machines have an interchangeable search coil system, but the Pilot flies above the rest, providing more options than many other metal detectors in its price range. Each Pilot comes standard with a D-Tech 725 search coil that is highly sensitive to smaller treasures such as gold jewelry, diamond rings, and older coins, while still delivering deep search technology.
The 725 coil also boasts a hotter signal sent through the transmitter winding, which is guaranteed to give a clear signal even for coins buried on their edge! And because the coil is completely waterproof, you can take this detector into the shallow surf and lake water! Other coil sizes are available in the accessory section of our website. Find small baby rings, wedding bands, ladies rings with precious stones and more!
The Teknetics Omega 8000 Metal Detector features a large, crystal clear and easy to read, identification meter. This new design enables even the novice of detectorists to see the treasures they've found before they begin to dig!
The all new Omega metal detector is one of the latest and greatest from the world-renowned Teknetics metal detector brand. Released at the end of 2008, just in time for the holiday season, the Omega boasts state-of-the-art detecting features housed in the most modern of detector designs.
The large control housing of the Omega features push buttons and adjustable knobs to control the interface, numerical depth readout, an intuitive menu system, and a running depth indicator. Two-digit numerical target identification system makes indentifying buried target fast and easy! With the Omega 8000 accuracy is improved on all targets - even those older and deeper coins.
The X-Terra boasts yet another new and radical technology to improve
single frequency detectors.
VFLEX technology uses state of the art digital and mixed-signal components to enhance standard single frequency technology replacing most of the analogue circuitry with digital signal processing.The small amount of analogue circuitry still employed has been very carefully designed and calibrated to obtain the outstanding sensitivity, stability and repeatability required to match the performance of the processing in the digital domain
This radical departure from traditional approaches to metal detector design has been made possible by advances in electronics that power personal digital assistants, cell phones and high fidelity portable audio equipment.
For the X-Terra user, this precision means dependable performance and improved immunity to environmental conditions such as ground mineralization, electromagnetic interference and temperature variations.
VFLEX technology requires coils that are accurately constructed and calibrated. Every time the detector starts up, the micro-controllers in the control box and the coil establish communication through a digital data link.
The X-Terra metal detector also introduces new graphic display pinpointing to put you right onto the target. The Pinpoint graphic display allows you to accurately dig the target with minimal ground disturbance, ideal for parks, buildings and other sensitive sites, and gives a nice centered response even from large deeper targets.
Larger LCD Display
The large LCD control display and intuitive interface allows users to become proficient in a fraction of the time it takes to master more complicated detectors. The X-Terra is smart and will remember your last settings, including saved patterns. It also allows the user to customize settings based on location and type of search with multi-notch accept / reject function and pre-programmed discrimination patterns.
Minelab X-Terra 505 Metal Detector
The Most Flexible and Configurable Treasure Detectors
New 3 kHz frequency option is now available with the new X-Terra 505. The 3 kHz coil gives improved depth on highly conductive metals, such as, silver and copper coins, as well as other large metal objects. (Available in an optional 9 inch size coil.)
In just two decades, Minelab has technologically revolutionized the metal detecting industry. During this period, Minelab introduced ground breaking technologies such as \\\"true automatic ground balance,\\\" \\\"Multi-Period Sensing\\\" and \\\"Multi-Frequency.\\\" Minelab\\\'s passion for solving every-day metal detecting challenges has earned it the reputation of making the best detectors that money can buy!
The X-Terra 505 is like having three detectors in one.
All X-Terra models offers an ergonomically designed three-piece shaft with a new waterproof concentric coil design. Featuring rugged, lightweight construction, the X-Terra\\\'s are perfectly balanced for hours of comfortable use in the field.
Each search coil you change on your X-Terra 505 Metal detector creates a new, different metal detector that operates on a different frequency, allowing you to find more treasures. Each coil adds new possibilities to your searching. Search deeper, find gold, and locate targets missed by other detectors. The possibilities are endless! Make two metal detectors from one X-Terra 505! The standard 7.5 kHz search coil is considered to be the optimum coil for all-purpose metal detecting.
Meanwhile the new, higher 18.75 kHz frequency provided by the 9\\\" search coil will find the smaller, more valuable targets such as coins on their edge, thin rings and wedding bands, and even small gold nuggets! No need to buy a second metal detector to find these smaller valuables. Changing coils on X-terra is like changing detectors. Maximize your X-Terra 505\\\'s flexibility with the new 9\\\" 18.75 kHz search coil that you\\\'ve been waiting for!
X-Terra 505 Face
The X-Terra 505 is a high performance intermediate detector. An ideal product for those who want to progress from entry level machines and who demand more advanced functionality and performance.
The 505 is a great all-round detector deticated to coin, relic and treasure hunting. It has Manual Ground Balancing allowing it to perofrm in the toughest terrain. The precision of its multi-segment notch discrimination makes it easy to eliminate \\\"trash\\\" and identify good targets.
Recovery is further enhanced by the 505\\\'s Depth indicator and rapid recovery Pinpoint function.
Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)
Minelab, the industry leader in metal detection technology has introduced Minelab\\\'s second generation X-Terra series. The X-Terra 705 is the flagship of the popular X-Terra line, and integrates Minelab’s proprietary VFLEX technology, which delivers unprecedented performance and flexibility.
“The X-Terra 705 is the world’s most flexible and configurable treasure detector,”. The marketplace has never seen a single machine that can hunt relics, coins and gold with such precision. Whether you’re beach combing, prospecting, hunting historic sites or just sweeping the local park, the X-Terra 705 will find treasures, coins and artifacts that other detectors have missed. With three field swappable (optional) accessory coils you’ll always be prepared for whatever contingency your hunt site and terrain has in store for you.”
As with all X-Terra models, the X-Terra 705 offers an ergonomically designed three-piece shaft with a new waterproof concentric coil design. Featuring rugged, lightweight construction, the X-Terra 705 is perfectly balanced for hours of comfortable use in the field. The X-Terra 705 will accept coils at three different frequencies; 3kHz, 7.5kHz and 18k.75Hz.
New Features:
* Maximized Depth
* Coin and Treasure, Prospecting Modes
* 4 Discrimination Patterns
* New Backlight
* New, 2-mode Pinpointing [Auto and Sizing]
* Ground Balance, Manual. [0-90], Auto, Beach Tracking, Tracking offset
Make 3 Metal Detectors With One X-Terra 705!!
X-Terra 705 is the flagship of the Minelab X-Terra Series and offers the flexibility of three frequency coil options (3kHz, 7.5kHz, 18.75kHz), which are field swappable to hunt Relics, Coins or Gold. Key to its outstanding performance is Minelab\\\'s proprietary VFLEX technology, which utilizes digital signal processing with highly calibrated analog circuits, creating a new class of single frequency detectors. This approach yields superior sensitivity, stability and improved immunity to electromagnetic interference, as well as providing high-resolution target ID even on the deepest targets. For the X-Terra 705 user, this means you\\\'ll have the best metal detector available for your target choices.
Changing coils on X-terra is like changing detectors. Maximize your
X-Terra 705\\\'s flexibility simply by changing coils
The large LCD control display and intuitive interface allows users to become proficient in a fraction of the time it takes to master more complicated detectors. The X-Terra is smart and will remember your last settings, including saved patterns. It also allows the user to customize settings based on location and type of search with multi-notch accept / reject function and pre-programmed discrimination patterns.
Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)
The high performance GPX 4800 metal detectors is capable of finding more GOLD than ever before - from sub-gram nuggets to \\\'retirement nuggets\\\'
and everything in between!
NEW improved electronics, NEW Soil/Timings and an amazing range of features combined with the legendary GPX ability to see through ground
mineralization sets a new gold detecting benchmark.
Using unique features, functions and industry leading technology ensures the GPX detectors run smooth and quiet even in the most severe ground
conditions, while still maintaining excellent depth and sensitivity to gold nuggets. You always get more for your money at www.KellycoDetectors.com
Easy for the beginner to old pros - you can switch on and go with factory preset Search Modes and automatic functions. Serious detectorists know that
GPX detectors find gold much deeper than ANY other detector, in ALL ground conditions!
The high performance GPX 5000 metal detectors is capable of finding more GOLD than ever before - from sub-gram nuggets to \\\'retirement nuggets\\\' and everything in between!
NEW improved electronics, NEW Soil/Timings and an amazing range of features combined with the legendary GPX ability to see through ground mineralization sets a new gold detecting benchmark.
Using unique features, functions and industry leading technology ensures the GPX detectors run smooth and quiet even in the most severe ground conditions, while still maintaining excellent depth and sensitivity to gold nuggets. You always get more for your money at www.KellycoDetectors.com
Easy for the beginner to old pros - you can switch on and go with factory preset Search Modes and automatic functions. Serious detectorists know that GPX detectors find gold much deeper than ANY other detector, in ALL ground conditions!
The world\\\'s most popular family of metal detectors has a new big brother. Introducing the new Garrett Ace 350. It comes with powerful, large 8.5" x 11" PROformance Double-D searchcoil. DD configuration provides greater detection depth and performance by significantly reducing the negative effects of heavily mineralized ground and saltwater interference. The long, narrow detection field provides excellent scanning coverage and target separation ability, as compared to conventional coils. The blunted tip and tail design further extends the coils total scan area and offers improved searching along obstacles and is optimized for maximum detection depth on small relics and coin-sized targets.
Is it possible to improve on Fishers legendary Gold Bug technology ? Gold Bug detectors by Fisher have been among the best selling detectors throughout the world. Not an empty claim, but a fact! From the advent of the first Gold Bug, Fisher has accomplished what few other companies can claim, and that is to create an ever improving line of great gold detectors, Fisher Gold Bug detectors have led the way to more powerful gold detectors with even greater sensitivity, resulting in more “finds” at greater depth!
Fisher has gone another major step forward with their newest offering the \\\"GOLD BUG Pro\\\". The engineers at Fisher have been busy designing one of the most sensitive new gold detectors to ever be offered by Fisher and at a very affordable price. Don\\\'t let its diminutive size fool you because it will find the smallest gold nuggets in highly mineralized soils! Let\\\'s face it, most dug nuggets at the shallower depths will be smaller in size for the most part and the Pro will show its best sensitivity! It\\\'s small 5 inch DD search coil will effectively cancel out most ground conditions and the prospector can monitor the ground phase and ground mineralization. Computerized to give optimum results in all soils!
More than a Hot Gold Machine, the Gold Bug Pro will make adjustments a snap with many user intuitive features. When you\\\'re not in the Gold fields simply change modes and your ready for relic hunting and even coin shooting. You can not find a deeper, easier to use light weight gold detector today for finding gold nuggets and don\\\'t worry the little Gold Bug Pro will find the bigger nuggets too.
